
Elinchrom D-Lite RX ONE 2 Head kit (Softbox) - INDENT
The D-Lite RX One 2-Light Kit with Stands and Bags from Elinchrom is a lightweight, portable strobe kit with two 100W/s D-Lite RX auto-sensing, multi-voltage monolights and compatible modifiers, stands and accessories for a complete light setup. The Elinchrom D-Lite RX One Flash Head is a 100Ws auto-sensing, multi-voltage monolight that recognizes any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a fast 0.5-2.1 sec. (@115V) with flash durations as short as an action-stopping 1/1,100 sec at full power.
Although it will accept a PC cord, the built-in EL-Skyport Receiver with eight frequency channels can handle four distinct groups of flashes without cables. With the addition of a EL Skyport Speed Transmitter, trigger your flash at distances up to 120m and control of power, on/off, modeling light functions and Speed Sync activation. Free software for Mac and PC computers is available, providing additional features such as Flash-Delay for strobing effects. Add the optional Wi-Fi module to the transmitter and you can use specially designed apps that allow full remote control via your iPhone, iPad or iPod Touch.
This kit includes:
- 2x D-Lite RX One Flash Heads
- Skyport Speed Transmitter
- PC to 3.5 mm Sync Cord
- 2 x Portalite Softbox 66 x 66 cm
- Tube Bag for BRX Light Kits
- Stand Kit with case
Maximum Watt/Seconds | 100 |
Flash Variability | 5.0 Stops in 1/10th stop increments |
Recycle Time | @ 230V: 0.44 - 1.5 sec @ 115V: 0.45 - 2.1 sec |
Flash Duration | 1/1,100 - 1/2,200 Sec. min./max. @ t0.5 |
Voltage Stabilization | 0.5% |
Auto Dump | Yes |
Power Requirements | Multi voltage, 90-260VAC |
Modeling Light Wattage | 100W Control: Proportional, Low, Full, On/Off |
User Replaceable Flashtube | Yes |
Umbrella Mount | Centered tub, for EL-umbrellas 7.0 mm diameter Extra fitting on bracket for larger sized shafts |
Flash Sync | Up to 1/320 sec. |
Sync Voltage | 5.0V Compatibility with digital cameras |
Power Consumption | 230VAC, 50Hz: No flash / recycling 140W / 310 115VAC, 60Hz: No flash / recycling 190W / 280VA |
Triggering | Synch cord (3.5 mm), optical slave Integrated Receiver, 4 groups, 8 frequencies Receiver range: 164' (50 m) indoors, 393' (120 m) outdoors |
Changeable Reflector | Yes |
Flash Ready Indicator | Audible, visual |
Fan Cooled | Yes |
Dimensions | 18 x 19 x 14 cm |
Weight | 0.9 kg |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: