Zenmuse Z15-A7 Gimbal

Zenmuse Z15-A7 Gimbal
Brand: DJI
Product Code: Zenmuse Z15 A7
Availability: Pre-Order
Price: NZD$4,999.00
Qty:  

Zenmuse Z15-A7 Features

  • Achieve Low-Light Aerial Creativity
  • Unmatched Zenmuse Precision and Stability
  • Streaming Video
  • Complete 360° Control
  • Fully Compatible Solution
  • Multiple Control Modes
  • Gimbal Servo Drive Module
  • Built-In Independent IMU Module and Infrared Module

General

Built-In Functions
  1. Three Modes
    · Orientation-locked control
    · Non orientation-locked control
    · FPV mode (Reset)
  2. Built-in independent IMU module
  3. DJI gimbal special servos drive module
  4. HDMI-HD/AV module
  5. Infrared remote control module
  6. Wireless video transmission supported
  7. Camera shutter/video recording control supported
  8. Wide range voltage input supported
  9. S-Bus Receiver supported

Peripheral

Supported Camera
Sony ILCE-7S; Sony ILCE-7R
Supported Lens Sony FE 35 mm f2.8 ZA
GCU Input Power
4S~12S LiPo (Recommend 6S if with S1000+)
Control Requirement
At least four spare receiver channels
Assistant Software System Requirements
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)

Mechanical& Electrical Characteristics

Working Current
Static current: 200 mA (@25 V)

Dynamic current: 400 mA (@25 V)

Locked-motor current: 4 A (@25 V)
Operating Temperature
-10°C ~ 50°C
Weight
 
1.3 Kg
Dimensions
210mmX204mmX246mm
GCU Weight  63g
GCU Dimensions
64.2 mm ×34.1mm ×19.5mm

Working Performance

Load Weight (Reference Value)
622 g(@Sony ILCE-7S with Sony FE 35 mm f2.8 ZA, battery, lens hood and SD Card)
580 g(@Sony ILCE-7R with Sony FE 35 mm f2.8 ZA, battery, lens hood and SD Card)
Angular Vibration Range
±0.01°
 
Maximum Controlled Rotation Speed
Pan axis: ±130°/s
Tilt axis: ±130°/s
Roll axis: ±30°/s
 
Controlled Rotation Range
 
 
 
 
 
Pan axis control: ±360° continuous rotation
Tilt axis control: +50°/-140°
Roll axis control: ±40°

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: