Your shopping cart is empty!
Fujifilm Instax Square SQ10
New Square format camera from Fujifilm!
HYBRID INSTAX CAMERA
- ·Photos you've taken can be printed any time, as many times as you want - whatever works for you!
- ·Save your photos to the internal memory or storage media so that you can view them whenever you want, then print your favorites.
- ·Have fun with image effects (filters, vignettes, brightness adjustment) before or after printing.
- ·Comes with a TFT color LCD monitor so you can edit and process images to create just the look you want. The split display allows you to view images and print them as displayed on the screen.
- ·You can also save other images to storage media (microSD card), edit and print from SQ10.
- ·In addition to reprints, you can find images from the print history and print them again*1.
- *1The last 50 printed photos are saved to the print history and can be reprinted from there.
|Image sensor||1/4-in., CMOS with primary color filter|
|Effective pixels||1920 x 1920|
|Storage media||Built-in memory, microSD/microSDHC memory card|
|Recording capacity||Built-in memory: Approx. 50 files
microSD/microSDHC memory card: Approx. 1000 files per 1 gigabyte
|File system||Compliant with Design Rule for Camera File System (DCF), Exif Ver.2.3, Compliant with JPEG and PIM|
|Focal length||Fixed as 28.5 mm (35-mm format equivalent)|
|Auto focus system||Single AF (Contrast-detect TTL, equipped with AF illuminator)|
|Focus range||10cm to ∞|
|Shutter speed||1/29500 sec. to 1/2 sec. (Auto), maximum 10 sec. in Bulb mode|
|Sensitivity||ISO 100 to 1600 (Auto)|
|Exposure control||Programmed AE|
|Metering||256-segment through the lens (TTL) metering, Multi metering|
|Flash||Auto/Compulsory flash/Suppressed flash/Slow synchro/Red-eye removal Effective range: Approx. 50 cm to 8 m|
|Shooting mode||Standard, Double exposure, Bulb mode|
|Self-timer||Approx. 10 sec./Approx. 2 sec.|
|Image effect||10 Filters, Brightness adjustment, Vignette|
|Playback function||Trimming, Multi image playback|
|Film||FUJIFILM Instant Film “instax SQUARE” (Purchased separately)|
|Photo capacity||10 prints/pack|
|Film size||86 mm x 72 mm|
|Image size||62 mm x 62 mm|
|Supported image size||800 x 800 dots|
|Printing solution||12.5 dots/mm (318 dpi, 80 μm dot pitch)|
|Printing levels||256 levels per color (RGB)|
|Supported image format||JPEG (Some images saved with a photo editing/processing software may not be displayed or printed.)|
|Printing time||Approx. 12 seconds|
|Print timing||Printing shortly after shooting/Printing after selecting image|
|Printing function||Images on built-in memory/micro SD card|
|Reprint||Printable up to the past 50 prints
(Up to 50 images stored in print history)
|Digital zoom||Up to 2.4 X in printing (Output pixels: 800 x 800)|
|Film detection||Yes (Automatic ejection when inserted)|
|LCD monitor||3.0-in. (7.6 cm) TFT color LCD monitor
Pixels: Approx. 460k-dots
|Input/Output terminals||Micro USB (For charging only)|
|Printing capacity||Approx. 160 prints (From when the battery is charged fully)
* Varies depending on the conditions of use.
|Charging time||Approx. 3 to 4 hours (Using 0.5 A USB port)
* Varies depending on air temperature.
|Dimension||119 mm x 47 mm x 127 mm (W x D x H)|
|Weight||450 g (includes fi lm pack and battery)|
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: